Omron NYM12W-C100, User Manual

Page: 78 / 130

4-4 Environmental Specifications
This section provides environmental specifications of the Industrial Monitor.
4-4-1
Operation Environment Specifications
The following table provides general environmental specifications for the Industrial Monitor.
Item
Specifications
12.1 Inch
*1
15.4 Inch
*1
Ambient operating temperature
0 to 55°C
*2
Ambient storage temperature
-20 to 70°C
*2
Ambient operating humidity
10% to 90% with no condensation
*2
Ambient storage humidity
10% to 90% with no condensation
*2
Operating atmosphere No corrosive gases
Altitude 2,000 m max.
Noise resistance (during operation) Conforms to IEC 61000-4-4, 2kV (power lines)
Vibration resistance (during opera-
tion) Conforms to IEC 60068-2-6.
5 to 8.4 Hz with 3.5 mm single amplitude and 8.4 to 150 Hz with 9.8 m/s²
for 10 times each in X, Y and Z directions
Shock resistance (during operation) Conforms to IEC 60068-2-27.
147 m/s², 3 times each in X, Y and Z directions
Degree of protection
Front of product: IP65
*3
Pollution degree 2 or less: Conforms to JIS B3502 and IEC 61131-2
*1. Refer to 1-4 Product Configuration on page 1 - 5 for details.
*2. Refer to 4-4-2 Temperature and Humidity Specifications on page 4 - 13 for ambient operating temperature
and humidity details.
*3. The Industrial Monitor may not operate properly in locations subjected to oil splashes for extended periods
of time.
4 Specifications
4 - 12
NY-series Industrial Monitor User's Manual (W554)