Omron NYM12W-C100, User Manual, Page: 57 / 130

3-2-2
Industrial Monitor Utility
This section provides an overview of the Industrial Monitor Utility.
Industrial Monitor Utility Overview
The Industrial Monitor Utility provides a user interface to control settings and display details of con-
nected Industrial Monitors.
A
B
C
D
E
F
G
I
J
K
H
Item Description Details
A Connected Monitors
Shows a list of the connected Industrial Monitors.
*1
Select one Industrial
Monitor in the list to display the Monitor Details. When selected the LED In-
dicators of the selected monitor will flash during 3 seconds.
B Product Information Provides the following details of the selected Industrial Monitor.
•
Serial Number
•
Screen Size
•
Hardware Version
•
Software Version
•
Model Name
•
Factory Identifier
•
Unit Lot Number
•
Logo Type
•
Video Status
C Monitor Settings Provides several setting adjustments to control the operation of the selected
Industrial Monitor.
D Backlight Brightness Ad-
justment
*2
Use the slider to control the brightness of the selected Industrial Monitor.
E Logo Brightness Adjust-
ment Use the slider to control the brightness of the Logo LED.
Refer to
2-2-1 Logo LED on page 2 - 5 for details about the Logo LED.
F Status Brightness Adjust-
ment Use the slider to control the brightness of the Status LED Indicator on the
monitor.
Refer to
2-2-2 Status LED Indicator on page 2 - 5 for details about the oper-
ation of the Status LED Indicator.
G Advanced Settings Provides advanced setting adjustments to control the operation of the se-
lected Industrial Monitor.
H Restore Factory Defaults Restores the factory default settings of the selected Industrial Monitor.
3 Software
3 - 5
NY-series Industrial Monitor User's Manual (W554)
3-2
Support Software
3
3-2-2 Industrial Monitor Utility