Omron NYM12W-C100, User Manual

Page: 43 / 130

2-2-1
Logo LED
The Logo LED brightness can be changed with the Industrial Monitor Utility.
Additional Information
The Logo LED brightness is adjustable.
Refer to Industrial Monitor Utility for brightness details.
The Industrial Monitor Utility information is available:
• For products
NYM
£
in the section Software in this manual.
• For products NYP
£
in the section Support Software in this manual.
• For products NY5
£
in the NY-series IPC Machine Controller Industrial Panel PC / Industrial
Box PC Setup User’s Manual (Cat. No. W568)
2-2-2
Status LED Indicator
The Status LED indicator provides information about the operating condition of the Industrial Monitor.
Color Status Meaning
None Not lit The Status LED is not lit in following situations:
•
The 24 VDC power is not supplied.
•
Normal operation
Green Blinking The Status LED is blinking in following situations:
•
The host PC is in standby mode.
•
The host PC power is not supplied.
•
The DVI cable or the NY Monitor Link cable is not connected.
Red Lit The Status LED is lit with maximum brightness in following situations:
•
Power supply defective
•
Monitor internal hardware error
Additional Information
The Status LED indicator's brightness is adjustable.
Refer to
Industrial Monitor Brightness Utility on page 3 - 8 for brightness details.
2 Hardware
2 - 5
NY-series Industrial Monitor User's Manual (W554)
2-2 LED Indicators
2
2-2-1 Logo LED