Omron NY532-1*00-111*13**0, User Manual, Page: 47 / 214

1-3 ID Information Label
The ID information label contains relevant information about the IPC Machine Controller.
The following example will be different from your product label.
CUSTOM ID
Corporation Kyoto, 600-8530 JAPAN MADE IN THE NETHERLANDS
PRODUCT NAME
B A
H E G
C D
Ver. .
F
Item Name Description
A Product name IPC Machine Controller
B
Model
*1
Model and configuration details
C Power rating Power rating details
D Custom ID
(Optional) A custom ID [NYC
£££
-
££££££££
]
Only for Industrial Monitors and Industrial Panel PCs with a custom logo
*1
.
E Standards and QR
code The applicable standards and a QR code for OMRON internal use
F Unit Ver. Unit version of the Machine Controller Software
G LOT number and
serial number Production details, consisting of:
•
The lot number of the IPC Machine Controller in the format DDMYY
£
.
DDMYY with Month number 1 to 9 for January to September, X for October, Y
for November, and Z for December.
£ : For use by OMRON
•
Serial number (4 digits)
H
MAC ADDRESS
*2
•
PORT 1: the MAC address of Ethernet port 1
•
PORT 2: the MAC address of Ethernet port 2
•
PORT 3: the MAC address of Ethernet port 3
*1. Refer to 1-4 Product Configuration on page 1 - 6 for model details.
*2. Refer to 4-2-4 Ethernet Connector Specifications on page 4 - 14 for Ethernet specifications.
Additional Information
Refer to 3-1-1 Front and Top of the Industrial Panel PC on page 3 - 2 for the ID Information
label location.
1 Introduction to the Industrial Panel PC
1 - 5
NY-series Industrial Panel PC Hardware User's Manual (W557)
1-3
ID Information Label
1