
4-4
Environmental Specifications
This section provides environmental specifications of the IPC Machine Controller.
4-4-1
Operation Environment Specifications
The following table provides general environmental specifications for the Industrial Panel PC.
Item
Specifications
Ambient operating temperature
0 to 55°C
Ambient storage temperature
-20 to 70°C
Ambient operating humidity
10% to 90% (with no condensation)
Ambient storage humidity
10% to 90% (with no condensation)
Operating atmosphere
No corrosive gases
Altitude
2,000 m max.
Noise resistance (during operation)
Conforms to IEC 61000-4-4, 2kV (power lines)
Vibration resistance (during opera-
tion)
The vibration resistance depends on the storage device(s):
•
For a Panel PC with only SSD storage devices: 5 to 8.4Hz with 3.5 mm
single amplitude and 8.4 to 150 Hz with 9.8 m/s² for 10 times each in X,
Y and Z directions. Conforms to IEC 60068-2-6.
•
For a Panel PC with one or more HDD storage devices the Panel PC
must be installed in a vibration free environment.
Shock resistance (during operation) Conforms to IEC 60068-2-27.
147 m/s², 3 times each in X, Y and Z directions
Degree of protection
Front of Monitor: IP65 or the equivalent
Pollution degree
JIS B3502 and IEC 61131-2: 2 or less
*1.
4-4-2 Temperature and Humidity Specifications
on page 4 - 24 for ambient operating temperature
and humidity details per CPU type.
*2.
A Panel PC with one or more HDD storage devices should not be used in applications subject to vibration.
Examples of applications subject to vibration:
•
AGV (Automated Guided Vehicles)
•
Rail vehicle
•
Stacker crane
•
Elevator
•
Tableting machine
•
Connector pin assembling machine
•
Bending machine
Ensure your Panel PC with HDD does not vibrate. When in doubt use a Panel PC with SSD storage devi-
ces.
*3.
The Panel PC may not operate properly in locations subjected to oil splashes for extended periods of time.
4 Specifications
4 - 23
NY-series Industrial Panel PC Hardware User's Manual (W557)
4-4 Environmental Specifications
4
4-4-1 Operation Environment Specifications
Summary of Contents for NY532-1*00-111*13**0
