![background image](http://html1.mh-extra.com/html/omron/nx-sl-series/nx-sl-series_instruction-and-reference-manual_742411077.webp)
2 - 43
2 Standard Functions
NX-series Safety Control Unit Instructions Reference Manual (Z931)
Dat
a T
y
p
e Co
nversio
n
In
struc
tion
s
2
IN
T_T
O
_TIME
INT_TO_TIME
This function converts an INT variable to a TIME variable.
If you omit an input or output parameter, a building error will occur.
This function converts INT data
In
to TIME data
Out
.
Example When Value of
In
Is INT#10500
• The value of
Out
is 10 s 500 ms (T#10s500ms).
To convert TIME data to INT data, refer to TIME_TO_INT.
• The input condition depends on whether the output is safety data or standard data. If the condition is
not met, a building error will occur.
• If you set a safety data type variable for the output terminal, set a safety data type variable for the
input terminal as well.
• If you set a standard data type variable for the output terminal, you can set either a safety data type
variable or a standard data type variable for the input terminal.
• If the input value is not INT#0 to INT#32767, a cast error will occur and the program will stop.
Instruction
Name
FB/FUN
Graphic expression
INT_TO_TIME
Convert INT to
TIME
FUN
Variables
Name
I/O
Description
Valid range
Default
In
Data to con-
vert
Input
Data to con-
vert
INT#0 to 32767
INT#0
Out
Conversion
result
Output
Duration
T#0ms to T#32s767ms
T#0ms
Boolean
Bit strings
Integers
Durations
BOOL
SAFEBOOL
BYTE
SAFEBYTE
WO
RD
SAFEWORD
DWORD
SAFEDWORD
INT
SAFEINT
DINT
SAFEDINT
TI
ME
SAFETIME
In
OK
OK
Out
OK
OK
Function
Additional Information
Precautions for Correct Use
INT_TO_TIME
Summary of Contents for NX-SL series
