![background image](http://html1.mh-extra.com/html/omron/nx-sl-series/nx-sl-series_instruction-and-reference-manual_742411068.webp)
2 Standard Functions
2 - 34
NX-series Safety Control Unit Instructions Reference Manual (Z931)
DINT_TO_WORD
This function converts a DINT variable to a WORD variable.
If you omit an input or output parameter, a building error will occur.
This function converts DINT data
In
to WORD data
Out
.
To convert WORD data to DINT data, refer to WORD_TO_DINT.
• The input condition depends on whether the output is safety data or standard data. If the condition is
not met, a building error will occur.
• If you set a safety data type variable for the output terminal, set a safety data type variable for the
input terminal as well.
• If you set a standard data type variable for the output terminal, you can set either a safety data type
variable or a standard data type variable for the input terminal.
• If the input value is not DINT#0 to DINT#65535, a cast error will occur and the program will stop.
Instruction
Name
FB/FUN
Graphic expression
DINT_TO_WORD
Convert DINT to
WORD
FUN
Variables
Name
I/O
Description
Valid range
Default
In
Data to con-
vert
Input
Data to con-
vert
DINT#0 to 65535
DINT#0
Out
Conversion
result
Output
Conversion
result
WORD#16#0000 to FFFF WORD#16#0000
Boolean
Bit strings
Integers
Durations
BOOL
SAFEBOOL
BYTE
SAFEBYTE
WO
RD
SAFEWORD
DWORD
SAFEDWORD
INT
SAFEINT
DINT
SAFEDINT
TI
ME
SAFETIME
In
OK
OK
Out
OK
OK
Function
Additional Information
Precautions for Correct Use
DINT_TO_WORD
Summary of Contents for NX-SL series
