Configure
Omron
NX
‐
EIC202
EtherNet/IP
Coupler
for
Use
with
Rockwell
Automation
PLCs
Page
3
of
16
1
Introduction
This document shows the basic steps for configuration of a Rockwell Automation PLC to connect
to the OMRON NX‐EIC202 EtherNet/IP coupler. The guide will assume the hardware installation
has already been completed following [1].
This document has been made using the Allen‐Bradley 1769‐L23E‐QB1 Controller, but will apply
to other Rockwell based controllers as well.
The following is required:
1.
OMRON NX‐EIC202 EDS file.
2.
Rockwell Automation RSLogix5000 tool.
3.
OMRON Sysmac Studio NX‐I/O edition.
Please be sure to read the related manuals to use the NX‐EIC202 Unit safely and properly.
Reference
Name
Cat.
No.
[1]
NX‐Series EtherNet/IP Coupler Unit User’s Manual
W536
