![background image](http://html1.mh-extra.com/html/omron/nx-ec0112/nx-ec0112_user-manual_742777316.webp)
8 Pulse Output Units
8 - 52
NX-series Position Interface Units User’s Manual (W524)
8-10 Functions
This section describes the pulse output methods, output mode selections, latch inputs, and other func-
tions of the Pulse Output Unit.
Precautions for Correct Use
Functions are restricted by the selected I/O refreshing method and Controller. Refer to
Differences in I/O Refreshing Methods Based on the Controller
on page 8-28 for details.
The following table lists the parameters that are used in the Pulse Output Unit.
8-10-1 Parameters
Parameter name
Function
Setting range
Unit
Default
Reference
Pulse Output
Method
0: Forward/reverse direc-
tion pulse
1: Pulse + direction
0 or 1
---
0
Output Mode Selec-
tion
0: Position-synchronous
pulse output
1: Velocity-continuous pulse
output
0 or 1
---
0
External Input 0
Function Selection
0: General input
1: Latch input 1
0 or 1
---
1
External Input 1
Function Selection
0: General input
1: Latch input 2
0 or 1
---
1
External Input 0
Logic Selection
0: N.O. (Normally open)
1: N.C. (Normally close)
0 or 1
---
0
External Input 1
Logic Selection
0: N.O. (Normally open)
1: N.C. (Normally close)
0 or 1
---
0
External Output 0
Function Selection
0: General output
1: Error counter reset out-
put
0 or 1
---
0
External Output 0
Logic Selection
0: N.O. (Normally open)
1: N.C. (Normally close)
0 or 1
---
0
Load Rejection Out-
put Setting
0: Immediate stop
1: Deceleration stop with
set deceleration rate
0 or 1
---
0
Deceleration at Load
Rejection
This is the amount to
reduce the velocity each
control period.
0 to
500,000,000
ms
0
Number of Synchro-
nization Command
Interpolations
This is the maximum num-
ber of interpolations for
missing synchronization
commands.
0 to 16
interpo-
lations
2
Pulse Direction
Change Delay
This is the pulse direction
change delay.
5 to 4,000
μ
s
5
Summary of Contents for NX-EC0112
