General-purpose Latching Relay
MYK
R
Terminal Arrangement/Internal Connections (Bottom View)
Note:
1. Resistor is for ampere-turn compensation and is
incorporated in the Relay rated at 50 VAC or above.
2. Pay attention to the polarity of the set and reset coils,
as incorrect connection of positive and negative ter-
minal will result in the Relay malfunctioning.
AC Model
DC Model
When using the Relay rated at 110 VAC at a supply volt-
age of 220 VAC, be sure to connect external resistors
Rs and Rr to the Relay.
If the supply voltage is applied to the set and reset coils
at the same time, the Relay will be put in the set state.
Use at 220 VAC
Rs: 7.3 k
Ω
3 W
Rr: 14.3 k
Ω
1 W
In the interest of product improvement, specifications are subject to change without notice.
Cat. No. J013-E1-02
OMRON EUROPE B.V.
Wegalaan 67-69,
NL-2132 JD, Hoofddorp,
The Netherlands
Phone: +31 23 568 13 00
Fax:
+31 23 568 13 88
www.eu.omron.com
