1.4 Format
standard
1-9
Overview
1.3 System
configuration
Model type
In this manual, an object that has been set in a state where various measurements and monitor can be
performed is defined as "System."
This product allows an independent unit (single-unit configuration) or multiple units connected
(multiple-unit connection configuration) to perform data measurements and status monitor. From here,
the description of this manual therefore employs as "a system" an object that has been set in a state
where various measurements and monitor can be done, regardless of whether one-unit configuration
or multiple-unit connection configuration is used.
Measurement master
Functional slave
CT extension slave
PMU1A (Electric power)
PMU2A (Power
two-system)
EMU8A
(pulse/temperature)
CTD8E (CT expansion)
Master behavior
{
{
× ×
Independent behavior
{
{
U
×
CT expansion
{
{
× ×
Electric
power
{
{
×
{
Electric
currents
{
{
×
{
Voltage
{
{
× ×
Temperature
× ×
{
×
Pulse
× ×
{
×
Measurement (Monitoring) function
Reverse
phase
{
{
× ×
Power voltage
AC100~240V 50/60Hz
None (supplied from
measurement master)
O: Enabled (with)
X: Disabled (without)
U
: Limited in part
* Master behavior is an operation for setting connections with slaves or sending or receiving measurement data
on slaves.
* Independent behavior is an operation that is performed for measurements or status monitor with a single unit
configuration adopted.
* CT expansion is a function by which CT extension slaves can be connected.
* EMU8A, which adopts one-unit configuration, cannot perform 3-STATE classification function or calculation of
power original unit.
(The 3-STATE classification function and calculation of power origin unit are available only when the
configuration of connection with the measurement master is adopted.)
