Omron K6PM-TH, User Manual

Page: 126 / 198

5 Monitoring and Setting with the EtherNet/IP Communications
5 - 24 K6PM-TH Thermal Condition Monitoring Device User’s Manual (H231)
This object is used to read and write settings such as the IP address, subnet mask, and default gate-
way.
Specify F5 hex.
Specify 01 hex.
The attribute ID specifies the information to read.
 Class Attribute ID
The class attribute ID specifies the attribute of the object class.
5-3-8 TCP/IP Interface Object (Class ID: F5 hex)
Service Codes
Service
code
Service name Description
Supported services
Classes Instances
01 hex Get_Attributes_All Reads the values of all attributes. Not supported Supported
0E hex Get_Attribute_Single Reads the value of the specified attribute. Supported Supported
10 hex Set_Attribute_Single Writes the value to the specified attribute. Not supported Supported
Class ID
Instance ID
Attribute ID
Attribute ID Parameter name Description Attribute
Data
Data type
Default
value
01 hex Revision Revision of the object Read UINT 0004 hex