background image

K-58

Temperature Meter 

K3MA-L

Operation/Adjustment Lockouts

Restricts key operations for operation level and adjustment level.

Initial setting is 0.

This cannot be displayed on models not equipped with the compar-
ative output function.

Setting Level Lockouts

Restricts shifting to initial setting level or advanced-function setting
level.

Setting Change Lockout

Restricts setting changes by key operation. When this lockout is set,
it is no longer possible to shift to a setting change mode.

However, all protect level parameters can still be changed.

Initial Settings

/ /

/ /

/

MODE

MODE

MODE

Operation/adjustment  
lockouts

Setting level lockouts

Setting change lockout

Operation Level

Protect level

Press             Level Key +           Mode Key for more than 1 s.

Press           Level Key +           Mode Key 
for more than preset time.

Paramet

er

Setting

Operation level

Moving to 

adjustment 

level

Process value 

display

Set value 

display

oapt

0

Allowed

Allowed

Allowed

1

Allowed

Allowed

Prohibited

2

Allowed

Prohibited

Prohibited

Parameter

Setting

Shift to initial 

setting level

Shift to 

advanced-

function 

setting level

icpt

0

Allowed

Allowed

1

Allowed

Prohibited

2

Prohibited

Prohibited

Parameter

Setting

Setting change by key 

operation

wtpt

off

Allowed

on

Prohibited

If required, shift to the advanced-function setting level to set the 
number of measurements for averaging, hysteresis values, 
auto-zero time, display color change, display auto-return time, 
or move-to-protect-level time.

Power ON

Press the Level Key        for 3 s min. to move to the initial setting  
level.

Select the input type.

If desired, shift to the adjustment level to set the temperature 
input shift value.

Set the OUT values.

Press the Level Key        for less than 1 s min. to return to the  
operation level.

Measurement starts.

Summary of Contents for K3MA-L

















Reviews: