2-4
Section
I/O Connecting Cable
7
2-3
Mounting the CS1 Bus Interface Board
Mount the CS1 Bus Interface Board to a PCI bus connector in the personal com-
puter.
Note
Turn OFF the power supply to the personal computer before starting the proce-
dure to mount the Board.
1, 2, 3...
1. Insert the CS1 Bus Interface Board into the PCI bus connector in the per-
sonal computer, making sure it is in the correct orientation.
2. Secure the CS1 Bus Interface Board with the screws provided with the per-
sonal computer.
2-4
I/O Connecting Cable
Use an I/O Connecting Cable to connect the personal computer to the CS1 CPU
Rack or CS1 Expansion Rack.
Note
Turn OFF the PC and the personal computer before connecting the I/O Connect-
ing Cable.
1, 2, 3...
1. As shown below, connect the smaller connector (50-pin connector) of the
I/O Connecting Cable to the CS1 bus interface connector on the CS1 Bus
Interface Board.
2. Connect the larger connector (68-pin connector) of the I/O Connecting
Cable to the expansion connector on the CS1 CPU Rack or CS1 Expansion
Rack.
Note
When the CS1 Expansion Rack is used, connect the cable to the OUT connector
on the last CS1 Expansion Rack.
