manualshive.com logo in svg

Omron IntelliSense IA1B, Instruction Manual

Share
Download
Omron IntelliSense IA1B Instruction Manual Download Page 19

• Your blood pressure monitor includes an irregular heartbeat

feature. Irregular heartbeats can influence the results of the
measurement. The irregular heartbeat feature automatically
determines if the measurement is usable or needs to be repeated.
If the measurement results are affected by irregular heartbeats
but the result is valid, the result is shown together with the
irregular heartbeat symbol (

). If the irregular heartbeats cause

the measurement to be invalid, no result is shown. If the
irregular heartbeat symbol (

) is shown after your have taken

a measurement, repeat the measurement. If the irregular
heartbeat symbol (

) is shown frequently, please let your

doctor be aware of it.

Instructions for special conditions

If your systolic pressure is known to be more than 220 mmHg, press and hold
the START button until the monitor inflates 30 to 40 mmHg higher than your
suspected systolic pressure.

Notes:

• The monitor will not inflate above 299 mmHg.
• Do not apply more pressure than necessary.

Correct Usage

18

How to Take a Measurement

EN-02-25[IA1B]-3

8/19/04, 10:06 AM

19

Summary of Contents for IntelliSense IA1B



























Reviews:

No comments

Brands by name

Popular brands

Load more brands