![background image](http://html1.mh-extra.com/html/omron/hem-9200t/hem-9200t_instruction-manual_741729012.webp)
12
2. Preparation
Battery Installation
Below procedures are ONLY done at inserting batteries.
1.
Remove the battery cover.
2.
Insert 4 “AA” batteries as
indicated in the battery
compartment.
3.
Put back the battery cover.
Notes:
• When the depleted battery symbol (
) appears on the display, turn the
monitor off, then replace all batteries at the same time. Long life alkaline
batteries are recommended.
• The measurement values continue to be stored in memory even after the
batteries are replaced.
• The supplied batteries may have a shorter life.
• Dispose of the device, components and optional accessories according to
applicable local regulations. Unlawful disposal may cause environmental
pollution.