26
3.Using the Unit
To Delete All the Values Stored in Memory
You cannot delete individual stored readings, all the readings in the unit
will be deleted.
1.
Press the Memory button
(
) to turn the monitor
on.
2.
Press the Memory button
(
) again. While holding
the Memory button (
),
press the START/STOP
button down for
approximately 5 seconds
until the digital display appears as it does in the illustration to
the right.
3.
Press the START/STOP button to turn the unit off.
If you forget to turn the unit off, it will automatically shut itself
off after two minutes.
Note:
If the date and time are reset to a time before the most
recent measurement, the average value will be based
on any measurements taken after the date and time
were reset. However, you can still view the readings
stored in memory.
HEM-7300-C3_B_M.fm Page 26 Tuesday, March 9, 2010 10:17 AM
