background image

8

How to Apply the Wrist Cuff

Wrap the Wrist Cuff.

1. Place the wrist cuff over

your left wrist with your

left thumb facing upward.

2. Hold the bottom part of the wrist cuff and wrap it around

the wrist while pulling so that it fits snugly.

* Unless the wrist cuff is wrapped snugly, correct measurement 

may not be possible.

* The remaining part of the wrist cuff can be conveniently folded back 

out of the way.

* For the slender wrist (wrist circumference of less than 145 mm), the wrist

cuff may not be wrapped snugly and give a feeling of loose wrap. In this
case, do not force to wrap since the measurement is not affected.

* Fasten the Velcro tape tightly by closely adhering both sides.

When measuring 

on the right wrist

Measurement can also be made
on the right wrist. Fit the monitor
as shown in the Figure.

* Wrap the wrist cuff over bare skin.
* Be sure not to roll in the sleeve 

of your cloth into the wrist cuff.

* As shown in the Figure, cover 

the wrist cuff by leaving
a space of 10 to 15 mm
(a space almost equal 
to the width of an index
finger) between the edge
of the wrist cuff and the
border of arm and the 
palm of a hand.

10 - 15 mm

Summary of Contents for HEM-630





















Reviews: