8. Adjusting the Settings
39
8.9 Overwrite
The unit will overwrite the oldest stored reading when the SD memory card or unit
memory is full. A message will warn that this will happen, you can choose to hide
or display this message. (The default setting is to hide the message.)
1.
Press the
button or
button to highlight
Display
or
Hide
, then press the
OK button to confirm your selection.
Caution!
While
Hide
is selected, the unit will overwrite (erase and replace) the oldest
measurement data with the results of the new measurement without displaying a
message, when the SD memory card or unit memory are full.
About the Overwrite message
If you select
Display
, the unit will display a message before
you take a measurement, asking if you want to overwrite
existing data with the new measurement data.
Select
Yes
to overwrite the oldest ECG data with the
results of the new measurement.
If you select
No
, measurement is cancelled.
The current setting is displayed at the
bottom of the screen.
HCG801-C1.fm Page 39 Wednesday, September 27, 2006 9:48 PM