1.
Press the Power Switch to turn the monitor ON.
The CAL symbol blinks on the display, then the display changes
to 0.0 lb.
Wait until 0.0 lb appears on the display.
2.
Lift the Display Unit out of the Display Unit Holder.
NOTE:
This monitor can be set to either the US or Metric
System. Personal Profile and memory will be displayed
by selected system. To change the US/Metric mode:
1) Press and hold the
UP button until “lb” and “kg” blink on the display.
2) Press the
UP or
DOWN button to select the mode, “lb” or “kg”.
3) Press the SET button to confirm the change.
SETTING PERSONAL DATA
To measure Body Composition, your personal data must be set. Your personal data includes your age,
gender and height. The Body Composition Monitor with SCALE provides two options to enter your
personal data.
1) Select a personal profile number to save your personal data. The monitor saves up to 4 personal
profiles. Select a number 1 through 4. Use this number to enter your personal data and when
taking a measurement.
2) Select Guest/Memory button if you do not want your personal data stored in the memory. When
you use the Guest option you will need to enter your personal data each time you take a
measurement. Measurement results are not stored in the memory when the Guest option is used
to take a measurement.
22
Buttons Used in this Procedure
DOWN Button
Press this button to go back one.
Press continuously to rapidly
decrease.
Press this button to advance one.
Press continuously to rapidly
advance.
UP Button
SET Button
Use this button to confirm the
personal data or move to the next
item after confirming the set item.
Personal Profile Number Button
Personal Profile Number Button
