H7E
@-N@P
27
Accessories (Order Separately) (Common)
■
New H7E (Except for PCB-mounting Counter)
The New H7E models are supplied with a mounting bracket (Y92F-34) and nut. Additionally, the Y92F-75/-76/-77B Flush Mounting Adapters shown
here allow the New H7E models to be fitted to existing panel cutouts.
Degree of protection (front): IP40 (not waterproof)
The DIP switch of the H7E
@
-N can be operated in mounted condi-
tion. Vibration resistance and shock resistant are the same level as
the H7E
@
-N series.
•
The minimum mounting interval is 30 mm.
Note: An interval of 40 mm is recommended for easier wiring.
•
Do not allow the ambient temperature of the H7E
@-
N to exceed the
specifications (55
°
C).
•
Mounting is possible onto panels with a thickness of 1 to 5 mm.
RST
47.6
2.4
18.6
4
26
(48
×
No. of units
−
2.5)
+1.0
0
22.2
+0.5
0
22.2
+0.5
0
45
+0.5
0
30 min.
Y92F-35 Compact Flush Mounting Bracket
Panel Cutout
Dense mounting
Single mounting
28.8 24.2 22.2
45.2
48.2
53.8
4
24.8
48.8
RST
24.2
38
38
50
22.2
27.5
48.2
52.5
60
45.2
4
31
24.2 22.2
45.2
48.2
63
72
4
26
26
45.3
63
Use mounting bracket supplied with the Counter
Panel cutout
Use mounting bracket supplied with the Counter
Panel Cutout
Y92F-75 Flush Mounting Adapter
for 26
×
45.3 Rectangular Cutout
Y92F-77B Flush Mounting Adapter
for 24.8
×
48.8 Rectangular Cutout
(Color: light gray)
Two, M4
Panel Cutout
(Color: light gray)
Use the Y92F-76 together with the Y92F-35 Compact
Flush Mounting Bracket.
Do not use the Flush Mounting Adapter supplied with the Counter.
(Color: light gray)
Two 4.5 dia. countersunk holes
Two 3.5 dia. mounting holes
Two, M3
Y92F-76 Flush Mounting Adapter
for 27.5
×
52.5 Rectangular Cutout
Note:
The mounting panel
thickness should be
between 1 and 5 mm.
