background image

CSM_H7E_-N_DS_E_9_3

1

Self-powered Totalizer

New H7E

Compact Economical Totalizer with High Visibility

Available with Backlit LCD Display

• Large display with 8.6-mm character height.
• Includes new models with backlight for improved visibility in dimly lit places. (Requires 24-VDC power supply.)
• Black and light-gray cases now available.
• PNP/NPN universal DC voltage input types now available.
• Battery is replaceable for Totalizer reuse and conservation of the environment.
• Key-protect switch to prevent faulty reset key operation.
• Dual operation mode.
• Front face compatible with NEMA4/IP66.
• Short body, all models have a depth of 48.5 mm.
• Finger protection terminal block conforms to VDE0106, Part100.
• Conforms to UL, CSA, and CE marking. 

Conforms to EN61010-1 (pollution degree 2/overvoltage category 

III

.)

• Conforms to EMC standards and EN61326, thus allowing use in residential, commercial and light- and heavy-industry environ-

ments.

• Six-language instruction manual provided.
• PCB-mounting models available. (Requires 3-V power supply.)

Broad Line-up of the New H7E Series

Contents

Self-powered Totalizers

H7EC.....................................................................................................................

2

H7ET .....................................................................................................................

9

H7ER.....................................................................................................................

16

H7E

@

-N

@

P ...........................................................................................................

22

Common to All Totalizers

Accessories ...........................................................................................................

27

Precautions ...........................................................................................................

29

New H7E

Total Counter

   8-digit

Time Counter

Tachometer

New H7EC

New H7ET

New H7ER

New H7E

@

-N

@

P

PCB-mounting Counter

   Total Counter (8-digit)

   Time Counter (999999.9h)

   999999.9h/ 

3999d23.9h

   999h59min59s/ 

9999h59.9min

   1,000 s

-1

 with 

     1 pulse/rev. encoder

   1,000.0 s

-1

 with 

     10 pulse/rev. encoder

   1,000 min

-1

 with 

     60 pulse/rev. encoder

   10,000 min

-1

 with 

     60 pulse/rev. encoder

   1,000.0 min

-1

 with 

     600 pulse/rev. encoder

Downloaded from

Arrow.com.

Summary of Contents for H7E


































Reviews: