4
Using
Tool
FZ4 User's Manual
Using Custom Command
193
Return Value
None.
Description
This command is a direct command intented to start execution from the same location when the program
is halted with the Stop command.
While the program is stopped you can print the variable name, etc., however, if the content of the
program is changed, there may be cases where it cannot be continued.
Example
When the stop statement is executed in the program, execution of the process of Macro Program is suspended;
however, the Macro Program processing is not exited.Thus, the processing of the menu will not be continued.
In addition, the following prompt will be displayed to the macro console.
MACRO>
While the prompt shown above is displayed, it is possible to directly input Macro Commands.
Example:MACRO> Print A&[ENT]
When the Cont command is input, program processing halted by the Stop statement is continued.
Example:MACRO> Cont[ENT]
Copy the scene data
CopyScene <srcSceneNo> , <destSceneNo>
Parameters
<srcSceneNo>
Scene number of the origin of copy (integer type)
<destSceneNo>
Scene number of the copying (integer type)
Return Value
None.
Description
Copy the data of the scene appointed with an <srcSceneNo> to scene appointed with a
<destSceneNo>.
When appoint scene number not to exist, it becomes error (Illegal function call).
When there is not the space work memory capacity that only copy, it becomes error (Illegal function call).
Example
Copy scene 2 to scene 3.
CopyScene 2 , 3
Acesst 1.0 6251194
Summary of Contents for FZ4 Series
