![background image](http://html1.mh-extra.com/html/omron/fq2-s4/fq2-s4_user-manual_742879359.webp)
Outputting Data and Controlling Operation through EtherNet/IP
FQ2-S4 User’s Manual
357
Con
necting
throu
gh
Eth
e
rnet
9
●
Data Acquisition/Setting Commands
After you execute the Reset command (0010F010 hex) for the Vision Sensor, turn OFF the EXE signal before the
Vision Sensor restarts. If you leave the EXE signal ON, the Vision Sensor will restart repeatedly.
Command Details
●
Start Continuous Measurements (Command Code: 0010 1020)
Command (PLC to Vision Sensor)
Response (Vision Sensor to PLC)
Command code in
command area (hex)
Command name
Function
Reference
00401010
Get Image Adjustment Data
Acquires data from a position compensation
item or filter item.
00501010
Set Image Adjustment Data
Sets the specified data in a position compen-
sation item or filter item.
00401020
Get Inspection Item Data
Acquires the inspection item data.
00501020
Set Inspection Item Data
Sets the inspection item data to the specified
data.
00403000
Get Software Version Informa-
tion
Acquires the software version.
First word of
command
area
Bits
Contents
12 to 15
8 to 11
4 to 7
0 to 3
+2
0001
0000
0010
0000
Command code
+3
0000
0000
0001
0000
First word of
response area
Bits
Contents
12 to 15
8 to 11
4 to 7
0 to 3
+2
0001
0000
0010
0000
Command code
The command code for which the
response applies is stored.
+3
0000
0000
0001
0000
+4
0000
0000
0000
0000
Response code
Command execution result
0: OK, FFFFFFFF: NG
+5
0000
0000
0000
0000
The measurement results are written to the output area if data output is set.
The measurement results are not output if data output is not set.
Setting the Data To Output Automatically after Measurements: p. 341
Important
Note
Summary of Contents for FQ2-S4
