![background image](http://html1.mh-extra.com/html/omron/fq2-s4/fq2-s4_user-manual_742879136.webp)
Reading DPM 2D Codes
134
FQ2-S4 User’s Manual
• All of the parameters except for the [Fast mode] measurement parameter are set when you press the [Teach]
Button.
• When the "Code type" setting is changed, some settings are initialized as shown below.
Outputting Read Characters to an External Device
After a measurement, you can automatically output the character string that was read with the DPM 2D code
inspection item to a PLC or other external device. The character strings are output after outputting the output
data (output data settings 0 to 31), such as the inspection item parameters and calculation result.
Refer to the description for the communications format for the setting procedure and output specifications to
output the character string.
Outputting Character Strings
• EtherNet/IP: p. 346
• TCP No-protocol Communications: p. 408
Parameter
Initialized due to "Code type" change
Code type
Initialized
Auto length
Size
Initialized
Reverse
Code color
Fast mode
Shape
Initialized
QR Code Model
Initialized
Error Correction Level
Initialized
Cell
Initialized
Important
Summary of Contents for FQ2-S4
