F50
0
C-61
F500
Flow Menus
Complete Image Processing Items
Image Input
Position
Compensation
Branching Control
Measurement Support
Results Output
Results Display
Display String
Display Measure
Display Judge
Positioning
Presence and
Direction Inspection
Appearance (Defect) Inspection
Dimension Inspection
Applications Package
Switch Camera
The camera can be selected when two cameras are
connected.
The camera image is read synced on an external
signal.
Filtering Again
Filtering can be performed many times for the same
image.
Changing Filtering
Filtering can be performed that is different from that
performed when the image was read.
EC Position Compensation
EC position compensation is effective for low-
contrast marks that vary in size.
Edge Position Compensation
Positioning is compensated based on the outline of
the workpiece found through edge
processing.
Binary Position Compensation
Positioning is compensated based on the center of
gravity and axis angle found using binary
processing.
Elapsed Time
The processing time to a specified point in the
process flow can be measured. This can be used
for the required processing, such as canceling
measurements for time delays.
Wait
The processing flow can be temporarily paused to
place processing on standby for a set period of time.
Trend Monitor
Measurement time can be displayed on a graph
along a time axis.
Set Unit Data
Setting data can be overwritten.
Calculation
Calculations, such as basic arithmetic, tangent,
cosine, and distance calculations, can be performed
on the measurement data found using
measurement functions.
Conditional Branching
Measurement conditions can be changed based on
measurement values and results.
DI Branching
Processing can be branched based on the input
status of the parallel interface.
End
End indicates the end of the process flow. (No
settings are required.)
Macros
Scroll
Images read using X,Y coordinates and angle data
found with measurement functions can be scrolled.
Reset Scroll
Images that have been scrolled can be reset to their
original positions.
Model Position Compensation
Positioning is compensated based on search points
found by matching with registered models.
Measurement
Memory Card Data
Measurement values can be output to a Memory
Card inserted in the Controller.
DO Judgement
The OK/NG judgement results can be output on the
parallel interface.
DO Data
Measurement values can be output as binary or
BCD data on the parallel interface.
Host Link Data
OMRON's PLC Host Link communications can be
used for measurement commands, judgement
results, measurement values, and other data
without special programming.
Data Logging
Measurement data and images can be stored inside
the Controller.
Normal Data
RS-232C communications can be used for
measurement commands, judgement results,
measurement values, and other data.
Display Item
Display Time
Display Figure
Display Line
Display Box
Display Circle
Display Cursor
F502-EN2-04.book Seite 61 Dienstag, 26. Juli 2005 5:48 17
