F3SJ-A
12
Accessories
Control Unit
*
NPN output type cannot be connected. Also, the system cannot be used as a muting system.
Laser Pointer
*
Battery life varies depending on a battery used.
Dedicated External Indicator Set
Water-resistant Case
Note: 1.
Vibration
When using Curtains with a protective height of 605 mm or more, the vibration performance of the applicable sensor is reduced.
Do not use these Curtains in locations that are subject to vibration.
2.
Operating range
When using these cases, the operating range of the applicable sensor is reduced.
Check the specifications prior to use.
3.
Mounting direction
When using Curtains with a protective height of 605 mm or more,
some slackness occurs due to the weight of the Curtain.
For this reason, mount these Curtains only in the vertical direction.
Item
Model
F3SP-B1P
Applicable sensor
F3SJ-B/A (Only for PNP output type)
*
Power supply voltage
24 VDC±10%
Power consumption
DC1.7 W max. (not including sensor's current consumption)
Operation time
100 ms max. (not including sensor's response time)
Response time
10 ms max. (not including sensor's response time)
Relay output
Number of contacts 3NO+1NC
Rated load
25 VAC 5 A (cos
ϕ
= 1), 30 VDC 5 A L/R = 0 ms
Rated current
5 A
Connection
type
Between sensors
M12 connector (8-pin)
Others
Terminal block
Weight (packed state)
Approx. 280 g
Accessories
Instruction manual
Item
Model
F39-PTJ
Applicable sensor
F3SJ Series
Power supply voltage
4.65 or 4.5 VDC
Battery
Three button batteries (SR44 or LR44)
Battery life
*
SR44: 10 hours of continuous operation, LR44: 6 hours of continuous operation
Light source
Red semiconductor laser (wavelength: 650 nm, 1 mW max. JIS class 2, EN/IEC class 2, FDA class II)
Spot diameter (typical value)
6.5 mm at 10 m
Ambient temperature
Operating: 0 to 40°C Storage: -15 to 60°C (with no icing or condensation)
Ambient humidity
Operating and storage: 35% to 85% (with no condensation)
Material
Laser module case: aluminum Mounting bracket: aluminum and stainless
Weight
Approx. 220 g (packed)
Accessories
Laser safety standard labels (EN: 1, FDA: 3) Button batteries (SR44: 3), instruction manual
Item
Model
F39-A01PR-PAC
F39-A01PG-PAC
F39-A01PY-PAC
Applicable sensor
F3SJ-A (Common for PNP/NPN output type. Can be attached to emitters and/or receivers)
Light source
Red LED
Green LED
Yellow LED
Power supply voltage
24 VDC±10% (supplied by sensor)
Consumption current
50 mA max. (supplied by sensor)
Connection type
Dedicated accessory connector cable (Sensor side: Dedicated 10-pin connector, Indicator side: M12 8-pin connector)
Set details
Indicator (red),
Dedicated connector cable (0.1 m),
Dedicated mounting bracket (1 for each)
Indicator (green),
Dedicated connector cable (0.1 m),
Dedicated mounting bracket (1 for each)
Indicator (yellow),
Dedicated connector cable (0.1 m),
Dedicated mounting bracket (1 for each)
Item
Model
F39-EJ
@@@@
-L, F39-EJ
@@@@
-D
Applicable sensor
F3SJ-A Series Curtains with a protective height of 600
mm or shorter.
F3SJ-A Series Curtains with a protective height of 605
mm or longer.
Ambient temperature
-10 to 55°C (operation and storage)
13 to 33°C (operation and storage)
Mounting direction
No restrictions
Vertical direction only (see following diagram)
Operating range
0.2 to 7 m (for a protective height of 1,631 mm max.), 0.2 to 5 m (for a protective height of 1,655 mm min.)
Degree of protection
IP67 (IEC 60529) (When assembled according to the application precautions)
Material
Case: Acrylic resin, Rubber: Nitrile rubber, M5 bolt: SUSXM7, M4 bolt: SUS316L,
Cable: Oil-resistant PVC, Plate: SUS304, Mounting Bracket (optional): SUS304
Weight (packed state)
Calculation formula: Weight (g) = 1.5 x
@@@@
+ 300 (
@@@@
stands for the four digits of the model number (protective height))
(The optional Mounting Brackets come in a set of two, and weigh 120 g. This weight is not included in the above formula.)
Terminating end
Cable end
Terminating end
Cable end
Horizontal direction
Vertical direction
Mounting direction (the cable end and terminating end can be posi-
tioned in either direction)