2-6
2-6 Setting the internal selector-switches
F3ET2 LIGHT CURTAINS OPERATION MANUAL
2
In
stallation
2-6 Setting the internal selector-
switches
Precautions for Correct Use
All the operations listed below must only be carried out when the receiver is disconnected to
the power supply.
L-ON/D-ON setting and distance setting can be changed by selector switches.
To access the selector switches unscrew the end cap of the receiver and transmitter unit:
There are two lines of dip switches in each transmitter and receiver. The settings must
be done for both lines.
Change the setting of the dip-switch and close the cap again. The light
curtain can now be reconnected to the power supply.
1 2
3
4 5 6 7
8
OFF
ON
1 2
3
4 5 6 7
8
OFF
ON
Summary of Contents for F3ET2 Series
