Omron F160 Vision Sensor, Operation Manual, Page: 133 / 148

124
Troubleshooting
Section 6-1
6-1 Troubleshooting
This section lists the errors that may occur during F160 operation, along with
their probable causes and remedies.
The letters used in the reference page column represent the following refer-
ence materials:
Setup: Setup Manual
Conv.: Conversational Menu Operation Manual (this manual)
Comm.: Communications Reference Manual
Error message Causes and remedies Reference
This camera cannot use
Intelligent Lighting. Check the settings under SYS/Camera settings.
Reason: Cameras other than F160-S1 and F150-S1A cannot use
Intelligent Lighting.
Conv.:
page 102
Detailed settings of camera
are incorrect. Correct the settings. Conv.:
page 102
Camera is not connected
properly.* Check the following:
- Are the Camera Cables connected to the F160?
- Is the Camera Cable disconnected from the Camera?
- Check the settings under SYS/Camera settings then cycle the
power.
Conv.:
page 102
Setup
Output file cannot be writ-
ten.* Specify a different file.
Change the file attributes so that it is write enabled.
-
Cannot access this file. Check the following points and re-select a file.
- Is the file read-only?
- Does the Memory Card have sufficient space to save the file?
-
Cannot write to scene group
file. Change the file attributes so that it is write enabled. -
The Camera shutter speed
is fixed and cannot be
changed. Check the Camera settings under SYS/Camera settings.
Reason: Only F160-S1 and F150-S1A Camera shutter speeds can
be adjusted from the menu.
Conv.:
page 102
Communications error (Data
transfer) (See note.)* Turn OFF the power to the F160, and check for the following items
before restarting the F160.
- The cable is connected properly.
- The communications specifications for the external device and
the F160 are the same.
- The external device is operating properly.
Reason: Data transfer has been interrupted due to a communica-
tions error in communications between the F160 and an external
device.
If the same error message appears after restart, it may mean that
the F160 is faulty. Contact your OMRON representative.
Setup
Comm.
Timeout error. (Data trans-
mission) (See note.)*
Incorrect data format
received. (See note.)* Select the correct transfer file and re-execute the data transfer.
Reason: The wrong file has been selected.
-
Background must not be
same color as Normal Change one of the colors. Conv.:
page 105
Cannot delete directory hav-
ing files. Delete the files in the directory to be deleted or move the files to
another directory.
Reason: Only empty directories can be deleted.
Conv.:
page 99
Directory name is not speci-
fied. Specify the directory name and press the ENT Key. Conv.:
page 93
Directory name contains
unusable character. Check the directory name. The following characters cannot be
used:
¥
/ : , ; * ? “ < > ! & .
-