7. EQ100 Settings
7-40
7.5. EQ100 Monitoring Setting
Overview
7.5.1.
The monitoring settings include the following functions. Configure the setting if necessary.
Monitoring
Setting
Description
Monitoring Alarm Occurs when a measured value exceeds the configured control value.
Device Alarm
Occurs when a device error is detected.
For device alarm, see "12.1.2. Event Log Code List".
Periodic Report Sends email regularly to check EQ100 operations.
Monitoring Alarm
7.5.2.
For this function, configure the upper and lower limits of the control values for each channel
collected by EQ100 and the number of times over the control values to occur an alarm. If a
measured data exceeds the setting, an email is sent or output is made to a general-purpose
output terminal. An email can be sent on a destination group and/or a time slot basis.
■
Setup Flow
Email Notification Setting
General-Purpose Output Setting
Control Value Setting
See "7.5.5. Control Value Setting”.
Control Value Setting
See "7.5.5. Control Value Setting”.
↓
↓
Destination Setting
See "7.5.8. Destination Setting".
Output Terminal Setting
See "7.5.9. Output Terminal Setting”.
↓
Notification Setting
See "7.5.6. Notification Setting".
↓
Email Sender Setting (SMTP, POP
Setting)
See "7.5.10. Email Transmission Setting".
Email Transmission
EQ100
Destination Group
General-Purpose Output
Mail Server