Omron Enterprise Manager 2100, User Manual

Page: 40 / 96

40 Enterprise Manager 2100 User’s Guide 14413-200 Rev. A
4.4 Connect the Enterprise Manager 2100 to a Network
4.4 Connect the Enterprise Manager 2100 to a Network
To use a single Enterprise Manager 2100 as a standalone appliance, connect the Ethernet ports
as shown in Figure 4-3.
Figure 4-3. Single Enterprise Manager 2100 as a Standalone Fleet Management Appliance
Omron Adept Technologies, Inc. recommends that you use cables that meet a minimum
requirement of Category 5e. The connections are described in Table 4-4.
Table 4-4. Cabling a Single Enterprise Manager 2100
Callout Label Port Description
Cable
To
1 n/a n/a Enterprise Manager 2100 configured in standalone mode. n/a
2 MAINT ETH0 The Maintenance port that you use for initial con-
figuration and for emergency access in future. This port
has a fixed IP address of 1.2.3.4.
Client
Windows
PC
3 MGMT ETH1 The Enterprise Manager 2100 Management port. LAN
Switch
4 FLEET ETH2 The Fleet administrative port. LAN
Switch
!
CAUTION: NETWORK SECURITY . Do not connect the Enterprise Manager
appliance directly to the Internet. If the Enterprise Manager appliance is on a
LAN that has Internet access, make sure there is a firewall between the LAN
and the Internet in order to prevent unwanted and unauthorized network
traffic from reaching the Enterprise Manager appliance.