Output switching
Do not use this product under ambient conditions that exceed the ratings.
Lay the product cable away from any high-voltage cable or power line. If laid in the same conduit or duct,
induction noise from them may cause malfunction or breakdown of the product.
Do not short the load. Explosion or burring may result.
Do not use the Sensor in water, rainfall, or outdoors.
30
■
Applicable
standards
・
EN61326-1
・
Electromagnetic environment : Industrial electromagnetic environment (EN/IEC
61326-1
Table 2)
Attention must be paid during operation or cleaning.
The following notice applies only to products that carry the CE mark：
Notice：
This is a class A product. In residential areas it may cause radio
Interference，in which case the user may be required to take adequate
measures to reduce interference.
The Amplifier Unit uses the EEPROM memory to store the configuration information. When the memory is
written to more than 10,000 times, a memory error appears and the Amplifier Unit needs to be replaced. The
memory data will be rewritten by performing a preset, threshold change, or tuning.
* 9 5 2 3 1 1 9 - 0 F *
