Omron E3Z-LASER, Datasheet

Page: 3 / 20

3 E3Z Laser Models
Ordering Information
Sensors
Accessories (Order Separately)
Slits (for E3Z-LT @@ )
Reflectors (for E3Z-LR @@ )
Sensing method Appearance Connection method
Response
time
Sensing distance
Model
NPN output PNP output
Through-beam
Pre-wired (2 m)*1
*1. Pre-wired Models with a 0.5-m cable are also available for these products. When ordering, specify the cable length by adding “0.5M” to the end of the model number
(e.g., E3Z-LT61 0.5M).
M12 Pre-wired Connector Models are also available. When ordering, add “-M1J” to the end of the model number (e.g., E3Z-LT61-M1J). The cable is 0.3 m long.
The following connection forms are also available. Ask your OMRON representative for details.
Pre-wired Models with 1-m or 5-m cables
Pre-wired Connector Models with M8 4-pin connectors, M8 3-pin connectors.
1 ms
*2
*2. Consult with your OMRON representative if a distance of more than 10 m is required. Models with large custom-size spots can be produced. These make optical
axis adjustment easier and allow the beam to be received more stably by the Receiver even if vibration is present.
E3Z-LT61 E3Z-LT81
Standard M8 Connector E3Z-LT66 E3Z-LT86
Retro-reflective with
MSR function
*3
*3. The Reflector is sold separately. Select the Reflector model most suited to the application.
Pre-wired (2 m)*1 *4
*4. Values in parentheses indicate the minimum required distance between the Sensor and Reflector.
E3Z-LR61 E3Z-LR81
Standard M8 Connector E3Z-LR66 E3Z-LR86
Distance-settable
(BGS Models)
Pre-wired (2 m)*1 E3Z-LL61 E3Z-LL81
Standard M8 Connector E3Z-LL66 E3Z-LL86
Pre-wired (2 m)*1
0.5 ms
E3Z-LL63 E3Z-LL83
Standard M8 Connector E3Z-LL68 E3Z-LL88
Slit width Sensing distance
Minimum detectable object
(typical)
Model Contents
0.5 mm dia. 3 m 0.1 mm dia. E39-S65A
One set
(contains Slits for both the
Emitter and Receiver)
Name Sensing distance (typical) Model Remarks
Reflector
15 m (300 mm) E39-R1S
• Retro-reflective models are not provided with
Reflectors.
• Separate the Sensor and the Reflector by at least the
distance given in parentheses.
• The MSR function is enabled.
7 m (200 mm) E39-R12
7 m (200 mm) E39-R6
Red light
60 m
(Using E39-R12)
(Using E39-R1)
7 m
(200 mm)
(Using E39-R6)
15 m
(300 mm
7 m
(200 mm)
20 to 40 mm
(Min. distance set)
20 to 300 mm
(Max. distance set)
25 to 40 mm
(Min. distance set)
25 to 300 mm
(Max. distance set)