A-160
Standard Photoelectric Sensors
Rating/performance
Sensor type
Retroreflective Models (M.S.R. function)
Item
Model
E3S-CR62-C
E3S-CR67-C
Sensing distance
250 mm (When using the E39-R6),
1 m (250 mm)*1 (When using the E39-R1)
*1. Values in parentheses indicate the minimum required distance between the sensor and reflector.
Standard sensing object 30 mm dia. X 150 mm glass tube (thickness: 1.8 mm)
Directional angle
2 to 6°
Light source (wave length) Red LED (660 nm)
Power supply voltage
10 to 30 VDC, ripple (p-p) : 10 % max.
Current consumption
40 mA max.
Control output
Load supply voltage: 30 VDC or less; load current 100 mA or less (residual voltage: NPN output
1.2 V or less, PNP output 2 V or less); open collector model (NPN/PNP output switching) light ON / dark ON
switching
Protective circuits
Load short protection, reverse connection protection, mutual interference protection function
Response time
Operation or reset: 1 ms max.
Sensitivity adjustment
2-turn endless adjuster (with indicator)
Ambient illuminance
Incandescent lamp: 5,000 lux max. Sunlight 10,000 lux max.
Ambient temperature
Operating: -25°C to 55°C, Storage: -40°C to 70°C (with no icing or condensation)
Ambient humidity
Operating: 35% to 85% RH, Storage: 35% to 95% RH (with no icing or condensation)
Insulation resistance
20 M min. at 500 VDC
Dielectric strength
1,000 VAC at 50/60 Hz for 1 minute
Vibration resistance
Destruction:10 to 2,000 Hz,1.5 mm double amplitude or 300 m/s
2
(approx. 30G) for 0.5 hrs each in x, y,
and Z directions
Shock resistance
1000 m/s
2
(approx. l00G) 3 times each in X, Y, and Z directions
Protective structure
IEC Standard IP67 NEMA 6P
(restricted to indoor use) *2
*2. NEMA (National Electrical Manufacturers Association) Standard
IEC Standard IP67 NEMA 6P
(restricted to indoor use)
Connection method
Pre-wired models (standard length: 2 m)
Connector type
Weight (Packed state)
Approx. 115 g
Approx. 80 g
Mate-
rial
Case
Zinc diecast
Lens
Acrylics
Display opera-
tion panel
Polyethyl sulfon
Mounting
Brackets
Stainless steel (SUS304)
Accessories
Brackets (with screws), adjustment driver, operation manual
F502-EN2-04.book Seite 160 Dienstag, 26. Juli 2005 5:48 17
