background image

General-purpose Limit Switch

 

D4A-

@N

F-9

Limit 

Switches

General-purpose Limit Switch

D4A-

@N

The Limit Switch with Better Seal, Shock 
Resistance, and Strength

• A double seal on the head, a complete gasket cover, and other 

features ensure a better seal (meets UL NEMA 3, 4, 4X, 6P, 12, 
13).

• Block mounting method to reduce weight to 290 g.

• Block mounting method also reduces downtime for mainte-

nance.

• Wide standard operating temperature range: 

–40

°

C to 100

°

C (standard type).

• Models with fluoro-rubber available for greater resistance to 

chemicals.

• DPDT, double-break models available for complex operations.

Model Number Structure

Model Number Legend

1. Receptacle Box

1:

1/2-14 NPT conduit (SPDT, double-break)

2:

1/2-14 NPT conduit (DPDT, double-break)

3:

G 1/2 conduit (SPDT, double-break)

4:

G 1/2 conduit (DPDT, double-break)

5:

M20 x 1.5 conduit (SPDT, double-break)

6:

M20 x 1.5 conduit (DPDT, double-break)

2. Switch Box

1:

SPDT, double-break, without indicator

3:

SPDT, double-break, neon lamp

A:

SPDT, double-break, LED (12 VDC)

C:

SPDT, double-break, LED 
(24 VDC, leakage current: 4 mA)

E:

SPDT, double-break, LED 
(24 VDC, leakage current: 1.3 mA)

G:

SPDT, double-break, LED (48 VDC)

5:

DPDT, double-break, simultaneous operation, without indi-
cator

7:

DPDT, double-break, sequential operation, without indicator
(See note 1.)

9:

DPDT, double-break, center neutral operation, without indi-
cator (See note 2.)

L:

DPDT, double-break, simultaneous operation, neon lamp

M:

DPDT, double-break, sequential operation, neon lamp
(See note 1.)

N:

DPDT, double-break, center neutral operation, neon lamp
(See note 2.)

P:

DPDT, double-break, simultaneous operation, LED

Q:

DPDT, double-break, sequential operation, LED 
(See note 1.)

R:

DPDT, double-break, center neutral operation, LED
(See note 2.)

3. Head

01:

Roller lever, standard

02:

Roller lever, high-sensitivity

03:

Roller lever, low torque

04:

Roller lever, high-sensitivity, low torque

05:

Roller lever, maintained

17:

Roller lever, sequential operation

18:

Roller lever, center neutral operation

06:

Side plunger, standard

07-V: Side plunger, vertical roller
07-H: Side plunger, horizontal roller
08:

Side plunger, adjustable

09:

Top plunger, standard

10:

Top plunger, roller

11:

Top plunger, adjustable

12:

Flexible rod, spring wire

14:

Flexible rod, plastic rod

15:

Flexible rod, cat whisker

16:

Flexible rod, coil spring

Note: 1.

Use the D4A-0017N Special Head.

2.

Use the D4A-0018N Special Head.

3.

Fluoro-rubber sealed type is also available.

1  2     3

D4A-

@@@@

N

Summary of Contents for D4A-1101N























Reviews: