174
FINS Communications
Section 6-5
• When routing tables are used for one or more other nodes on the same
network.
It is not necessary to set routing tables if the nodes are connected as one
network.
Procedure for Using FINS/TCP
Note
Routing tables are required in the following situations:
• When communicating with a PLC or computer on another network (e.g.,
remote programming or monitoring using FINS messages or a CX-Pro-
grammer).
• When routing tables are used for one or more other nodes on the same
network.
It is not necessary to set routing tables if the nodes are connected as one
network.
6-5-4
PLC Setup for FINS/UDP and FINS/TCP Applications
Aside from the basic settings, the required settings vary depending on the par-
ticular communications applications that are used. All these settings are in the
Built-in Ethernet Tab. Click on the relative button can open the setup dialog.
FINS/UDP
FINS/TCP
1. Make the basic settings.
Refer to 6-4-1 Overview of Startup Procedure.
3. Make the routing table settings and transfer them to each PLC. (See note.)
Set the routing tables with CX-Integrator, and transfer it to each PLC.
4. Create a ladder program that includes the SEND, RECV, and CMND
instructions.
2. Make the settings for FINS/TCP in the PLC Setup with CX-Programmer.
Button name
Settings
FINS/UDP Setting
Conversion
FINS/UDP Port No.
IP Address Table
Destination IP Address
Change Dynamically
Button name
Settings
FINS/TCP Setting
FINS/TCP Port No.
FINS/TCP Connection Setup
Summary of Contents for CP1L-EL20DR-D
