8
CLEANING AFTER EACH USE
Following the cleaning instructions after each use will prevent any remaining
medication in the bottle from drying resulting in the device not nebulizing
effectively.
Important:
Thoroughly rinse the nebulizer and the mask or mouthpiece with hot
tap water after each use, and clean with a mild detergent after the last
treatment of the day. Do not give heavy stress to the funnel or drop it.
Do not start operation before the cleaned parts are completely dried.
1. Remove the mouthpiece or mask from the nebulizer.
2. Disconnect the air tubing from the nebulizer.
3. Gently twist and pull the nebulizer to separate the nebulizer into two sections.
4. Remove the funnel from the bottom section of the nebulizer.
5. Rinse both sections of the nebulizer, mouthpiece or mask, and funnel
with hot tap water.
6. Dry with clean paper towels or allow the parts to air dry in a clean
environment.
7. Assemble the device. Put the parts in a dry, sealed bag and place in the
storage pocket of the carrying bag.
THERMAL PROTECTOR
The compressor has a thermal protector which will turn the power off before
the compressor overheats. If the thermal protector shuts the power off:
1. Turn the compressor off.
2. Unplug the power cord from the electrical outlet.
3. Make certain the air slots on the compressor are not obstructed.
4. Wait 30 minutes for the motor to cool.
5. Restart the compressor.
6. If you are still experiencing prob
l
ems, contact your healthcare dealer
for assistance.
Summary of Contents for COMPAIV XLT NE-C25
Page 12: ...1 NE C25 TC 01 13 CX4 _14APR08 5 9 08 4 39 PM 1...
Page 15: ...4 co 1 2 3 4 5 9 6 8 7 NK OK L PK QK RK SK TK UK VK TC 01 13 CX4 3 1 04 9 41 AM 4...
Page 18: ...7 UK VK 01234 NMK NNK NOK L 012 NPK 0123 45 NQK 0 TC 01 13 CX4 3 1 04 9 41 AM 7...
Page 23: ...12 MEMO TC 01 13 CX4 _14APR08 4 14 08 9 42 AM 12...
