38
Cobra 350 User's Guide
05624-000 Rev. K
4.4 Connecting Digital I/O to the System
4.4 Connecting Digital I/O to the System
You can connect digital I/O to the system in several different ways. See the following table and
figure.
NOTE:
A typical IO Blox configuration is shown in Figure 4-4. Other con-
figurations may be possible. Contact your local Omron support for more inform-
ation.
Table 4-7. Digital I/O Connection Options
Product
I/O Capacity
For more details
XIO Connector on
eMB-40R
12 inputs
8 outputs
Using Digital I/O on eMB-40R
XIO Connector on page 39
XDIO on optional
SmartController EX
12 inputs
8 outputs
SmartController EX User’s
Guide
Optional IO Blox Devices,
connect to EXPIO con-
nector on the eMB-40R
8 inputs, 8 outputs per device; up
to four IO Blox devices per system
IO Blox User’s Guide
eMB-40R
1
2
4
3
6
5
DC
IN
24V
GND
AC
200 -
240V
Ø
1
XBEL
TIO
XIO
Servo
ENET
ENET
XSYSTEM
Figure 4-4. Connecting Digital I/O to the System
