6
From the
File
menu, select
New
–
Project
.
7
As shown in the right figure, after you
select
Power PMAC
, input a project
name and save destination, and select
the
OK
button.
3-2-2
Controller Initial Setting
Follow the procedure below to perform the initial settings for the Controller.
Precautions for Correct Use
Since all memory is cleared by the initial settings, be sure to save any data remaining in the
Controller that you may need.
1
Type the
$$$***
command from the Ter-
minal, and set the Controller to the fac-
tory default state.
3 Connection Procedures
3-5
Application Guide Laser Application (O052)
3-2 Controller Setting Preparations
3
3-2-2
Controller Initial Setting
Summary of Contents for CK3M-CPU 1 Series
