1-17
1 Features and System Configuration
CJ-series DeviceNet Units Operation Manual for NJ-series CPU Unit(W497)
1-4 B
asic Operati
ng Pr
o
ced
ures
1
1
-4-2
De
viceNet Un
it Star
tup Procedu
re
With this Unit, the slave areas of the following functions are allocated to the Memory used for CJ-series
Unit.
•
Fixed allocations and user-set allocations (Master)
•
Fixed allocations and user-set allocations (Slave)
The user program accesses the slave via the user-defined variable that specifies the AT specification
for the area where the slave is allocated. With this Unit, the device variable for CJ-series Unit, or a user-
defined variable that specifies the AT specification of the allocation area for the slave as setup using the
CX-Integrator software application, needs to be created. User-defined variables are created using Sys-
mac Studio.
Have the necessary user-defined variables created before creating a program.
For details on operations, refer to the
Sysmac Studio Version 1 Operation Manual
(Cat. No. W504).
Precautions for Correct Use
Precautions for Correct Use
The user is responsible for management of the memory used for CJ-series Unit. Please take
great care to avoid overlapping of reference areas between user-defined variables.
z
Using the Master Function
To use this unit as a master function, the
*_Sw1MstrEnblCmd
(Master Enable Switch) must be changed
to TRUE from Sysmac Studio.
Note
Enable master communications through CJW-DRM21 properties if you use CX-Integrator.
Allocation of User-defined Variables to the Memory Used for CJ-
series Unit
Network Configuration Settings
Summary of Contents for CJ1W-DRM21
Page 12: ...Manual Structure 10 CJ series DeviceNet Units Operation Manual for NJ series CPU Unit W497 ...
Page 42: ...Revision History 40 CJ series DeviceNet Units Operation Manual for NJ series CPU Unit W497 ...
Page 345: ...Index 1 CJ series DeviceNet Units Operation Manual for NJ series CPU Unit W497 I Index ...
Page 349: ......