17
1
2
7.
Attach the front panel.
Insert the tab at the bottom of the front panel into the hole in the main body
➀
, and push the plate cover
towards the main body.
➁
Use a screwdriver to securely tighten (clockwise) the 2 screws at the top of the front panel.
6.
Securely connect the connectors.
➀
Secure the connectors to the plate cover.
➁
You may hear a “pop” sound when you connect the battery if it is replaced after the unit’s
operation is stopped, but this sound is not abnormal.
If you cannot secure a connector to the plate cover, the connector is not completely
connected.
Connect the connector again.
1
2
Battery replacement is complete.
Use the 3 supports
on the plate cover to
secure the connectors.
Tighten the 2 screws.
