Rocker Switch
Safety Precautions
Handling
•
Do not drop the Switch. Otherwise, the Switch may
malfunction.
•
Do not impose excessive force on the Switch. Otherwise, the
Switch may deform.
•
Use the Switch within the rated voltage and current ranges,
otherwise the Switch may have a shortened life expectancy,
radiate heat, burn out or malfunction.
•
Do not impose force to operating part from an angle, otherwise
the Switch may be damaged or deformed.
•
The recommended panel material is SPCC. The switch may
not be held securely if the material is soft, or if the reverse side
of panel is not edge-shaped. Be sure to test the switch in actual
operation before setting the thickness and measurements of
panel.
RoHS Compliant
The "RoHS Compliant" designation indicates that the listed
models do not contain the six hazardous substances covered by
the RoHS Directive.
Reference: The following standards are used to determine
compliance for the six substances.
Lead
: 1,000 ppm max.
Mercury
: 1,000 ppm max.
Cadmium
: 100 ppm max.
Hexavalent chromium : 1,000 ppm max.
PBB
: 1,000 ppm max.
PBDE
: 1,000 ppm max.
Correct
Incorrect
Please check each region's Terms & Conditions by region website.
OMRON Corporation
Electronic and Mechanical Components Company
Regional Contact
Cat. No. A202-E1-04
1020(0207)(O)
Americas Europe
https://www.components.omron.com/ http://components.omron.eu/
Asia-Pacific China
https://ecb.omron.com.sg/ https://www.ecb.omron.com.cn/
Korea Japan
https://www.omron-ecb.co.kr/ https://www.omron.co.jp/ecb/
In the interest of product improvement, specifications are subject to change without notice.
© OMRON Corporation 2007-2020 All Rights Reserved.
