Omron 3G3RX Series, User Manual

Page: 208 / 442

4-99
4-2 Function Mode
4
Func
tions
Output Signal Logic Operation
• This function performs output signal logic operations inside the Inverter.
• All output signals are operation targets.
However, the logic operation outputs (LOG1 to LOG6) are not subject to operations.
0 1 1 1 E06
Braking resistor overload
protection
⎯
Other errors
1 0 0 0
E08, E11
E23, E25
EEPROM error, CPU error,
GA communication error, Main
circuit error
⎯ ⎯
1 0 0 1 E10 CT error
⎯ ⎯
1 0 1 0
E12, E13
E35, E36 External trip, USP error,
Thermistor error, Brake error
⎯ ⎯
1 1 0 0 E14 Grounding protection
⎯ ⎯
1 1 0 1 E20
Abnormal temperature due to
the cooling fin's speed drop
1 1 0 1 E21 Abnormal temperature
⎯ ⎯
1 1 1 0 E24 Input phase loss protection
⎯ ⎯
1 1 1 1 E50 to E79
Network error, Options 1, 2
Errors 0 to 9
⎯ ⎯
Multi-function output terminals With 4-bit code selected With 3-bit code selected
14 13 12 11
Factor code Trip cause Factor code Trip cause
AC3 AC2 AC1 AC0
Parameter No. Function name Data Default setting Unit
C021 to C025
Multi-function
output terminal
selection
33: LOG1
(Logic operation output [C142, C143, C144])
34: LOG2
(Logic operation output 2 [C145, C146, C147])
35: LOG3
(Logic operation output 3 [C148, C149, C150])
36: LOG4
(Logic operation output 4 [C151, C152, C153])
37: LOG5
(Logic operation output 5 [C154, C155, C156])
38: LOG6
(Logic operation output 6 [C157, C158, C159])
⎯
⎯
C026
Relay output
(MA, MB) function
selection
05
C142/C145/C148/
C151/C154/C157
Logic output signal
selection 1
Select 00 to 50 from the multi-function output
data (other than LOG1 to LOG6):
Select operand 1.
00
⎯
C143/C146/C149/
C152/C155/C158
Logic output signal
selection 2
Select 00 to 50 from the multi-function output
data (other than LOG1 to LOG6):
Select operand 2.
00
⎯
C144/C147/C150/
C153/C156/C159
Logic output signal
operator selection
00: AND
01: OR
02: XOR
00
⎯