4-87
4-2 Function Mode
4
Func
tions
• Set RUN command selection A002 to 01 (control circuit terminal block).
• The following operations become possible when 20 (STA), 21 (STP), and 22 (F/R) are allocated to
any of multi-function inputs 1 to 8 (C001 to C008). Allocating the STP terminal disables the FW and
RV terminals.
• Below are the outputs via terminal operation.
Control Gain Switching Function
• This function provides two types of gain and time constant settings for the speed control system
(proportional/integral compensation). You can switch over these settings when "sensorless vector
control", "0-Hz sensorless vector control", or "sensor vector control" is selected as the control
method.
Available input terminals
C001 to C008
Required settings
A002 = 01
Data
Symbol
Function name
Status
Description
STA
Output frequency
Forward
Reverse
STP
F/R
ON
OFF
ON
OFF
Parameter No.
Function name
Data
Default setting
Unit
A044/A244
V/f characteristics selection
03: Sensorless vector
04: 0-Hz sensorless vector
05: Sensor vector
00
⎯
C001 to C008
Multi-function inputs
1 to 8 selection
26: CAS (control gain switching)
⎯
⎯
H005/H205
Speed response
0.001 to 9.999/10.00 to 80.00
1.590
⎯
H050/H250
PI proportional gain
0.0 to 999.9/1000
100.0
%
H051/H251
PI integral gain
0.0 to 999.9/1000
100.0
%
H052/H252
P proportional gain
0.01 to 10.00
1.00
⎯
H070
For PI proportional gain
switching
0.0 to 999.9/1000
100.0
%
H071
For PI integral gain switching 0.0 to 999.9/1000
100.0
%
H072
For P proportional gain
switching
0.00 to 10.00
1.00
⎯
Summary of Contents for 3G3RX Series
