2JCIE-EV01- AR1 Sensor Evaluation Board User’s Manual (A294)
4
3. Sensor board setup
3-1 Checking Sensor Evaluation Board Components
Make sure the following components are included with the Sensor Evaluation Board.
Sensor Evaluation Board
x1
Pin Headers
x2
Fig. 1 Sensor Evaluation Board Components
3-2 Soldering
1) From the back of the Sensor Evaluation Board, insert the provided pin header into the
through-holes (CN10, CN11). We recommend that you use a breadboard to keep the pin header
from shifting out of position.
Sensor Evaluation Board / front
Sensor Evaluation Board / back
Fig. 2 Appearance of Sensor Evaluation Board
Note:
This side with the printed OMRON logo is the front side.
If soldering fails and you need to purchase a pin header, purchase a pin header with 14 pins at a
pitch of 2.54 mm.
Recommended pin Header: SAMTEC / TSW-114-07-L-S
CN10
Pin Headers
Sensor Evaluation Board
CN11
