background image

Select  Language

1

Japanese 

2

 English

Introduction

Thank you for purchasing the ZG2 Data Storage Unit (ZG2-DSU).
This manual provides information regarding functions, performance and operating methods that 
are required for using the ZG2-DSU.
When using the ZG2-DSU, be sure to observe the following:

 • The ZG2-DSU must be operated by personnel knowledgeable in electrical engineering.
 • To ensure correct use, please read this manual thoroughly to deepen your understanding of the 

product.

 • Please keep this manual in a safe place so that it can be referred to whenever necessary.

How to Switch the Display Language to English

Turn the power ON with the MENU key held down. 
This displays the display language selection screen.

The unit will start up with the messages displayed in English when it is next started up.

About Trademarks

• Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corp. in the 
United States and/or other countries.
• CompactFlash is a trademark of SanDisk Corporation. 
• Other product and company names herein may be either registered trademarks or  trademarks of 
their respective owners.

Summary of Contents for 257553





























































































Reviews: