SELECT THE CORRECT MOUNTING HARDWARE FOR
YOUR TELEVISION
Select the correct mounting screws, either (G) or (H). The M7216 can be mounted tilt
up or tilt down.
CAUTION: Always make sure the television is unplugged before threading any bolt
into the back panel! First find the screw holes in the televisions back, then select the
screws that fit the screw holes dimension.
IMPORTANT: If you cannot find the screws that fit your television, please contact your
local hardware shop.
STEP 2
fig. 2.1
fig. 2.2
Tilt Down
Tilt Up
Monitor
Monitor
Mount
Pivot Screw
Pivot Screw
Mount
DETERMINE THE TILT DIRECTION AND ATTACH TO
TELEVISION
To have the monitor tilt up, the monitor plate should be attached to the monitor
with the pivot screw at the top, as shown in fig. 2.2. To have monitor Tilt down, the
monitor plate should be attached to the monitor with the pivot screw at the bottom,
as shown in fig. 2.1.
STEP 3
COMPONENTS
MOUNTING INSTALLATION INSTRUCTIONS
Designed for small flat panels (10”- 24”) to install to a vertical wall.
Maximum load capacity: 18kg (40lbs).
CAUTION:
If you do not understand these instructions, or have doubts about the safety of the
installation, please call a qualified installer or contact us. We will provide assistance
for any safety issues and resolve any missing component problems. Please check
carefully to make sure there are no missing or defective parts. Do not use components
with defects, as wrong installation may lead to component damage or serious injury
to the user. Do not use this product for any purpose other than the original intended
use. The hardware supplied for this product cannot be used on a steel stud wall, old
cinder block wall or a hollow wall. If you cannot determine the nature of a wall, please
consult a qualified installer. Our company will not be held responsible for damage or
loss caused by wrong installation or assembly. Regular cleaning of this product with
a clean dry cloth is usually sufficient, but for stubborn marks, wipe over gently with a
clean damp cloth. Never use strong detergents or abrasives, as these may damage
the surface. There are many small components used in the construction of this unit,
these loose items should be kept away from young children whilst assembling your
unit. Do not exceed the maximum weight capacity for this product. Your installer is
responsible for ensuring the safe installation of this product.
fig. 1
1 x mount plate front (A)
4 x M4x15mm philips
screws (G)
1 x mount plate back (B)
4 x M4x25mm philips
screws (H)
4 x washers (C)
4 x spacers (D)
4 x M6x40mm wood
screws (E)
4 x wall anchors (F)
1 x allen wrench (I)
Summary of Contents for M7216
Page 2: ......
