00072955.DOC, Version 1.0
19/19
8. PROBLEM CHART
PROBLEM
CAUSE
REMEDY
The power does not turn on.
•
The power cable is not
connected.
•
Connect the cable to a power outlet.
There is little or no sound.
•
The input selector switch is in the
wrong position.
•
The connection cable was not
connected properly or not connected
at all.
•
The terminal or plug is dirty.
•
The master level is too low.
•
Set the selector switch to the correct
signal source.
•
Connect the cable properly.
•
Clean and reconnect.
•
Increase the level with the master
control.
There is noise or distortion.
•
The master level is too high.
•
The input level is too high.
•
Via the output meter, adjust the
master level to an optimum level with
the master control.
•
Via the output meter, adjust the
channel to an optimum level with the
gain control.
9. TECHNICAL SPECIFICATIONS
Power supply:
230 V AC, 50 Hz ~
via supplied power unit
Power consumption:
4 W
Inputs:
Line/phono:
2 x stereo RCA
Line:
stereo RCA
Aux:
3.5 mm stereo jack
DJ microphone:
6.3 mm jack, unbal.
Outputs:
Master:
stereo RCA
Record:
stereo RCA
Headphones:
6.3 mm stereo jack (
R
32
)
Frequency range:
20-20000 Hz
S/N ratio:
>75 dB
Distortion:
<0.07 %
Dimensions (LxWxH): 260 x 172 x 78 mm
Weight:
1.5 kg
Please note: Every information is subject to change without prior notice. 05.11.2012 ©
