00043092.DOC, Version 2.0
21/31
4.2 Operating elements and connections
1
Matrix input selector switches
For selecting the input source for the channels 1-3. The
LEDs indicate which input is active. Aux and mic input
sources are freely assignable to each channel. For
creative mixing, the same source may be assigned to
several channels.
2
Gain controls
Adjust the input amplification for the channels 1-3.
3
Output level LED meter
L/R
10-digit LED meter for the stereo master signal within the
range of -24 dB to +9 dB.
4
Control ZONE
Level control for the output ZONE.
5
Master control
Level control for the master output.
6
Control BOOTH
Level control for the output BOOTH.
7
Buttons
CUE
Buttons for monitoring the input channels 1-3 ahead of
the respective channel fader via headphones connected
to the jacks HEADPHONES. With the button pressed, the
blue LED lights to immediately indicate that a channel is
monitored.
8
Tone controls
3-band equalizer for the channels 1-3: TREBLE,
MIDDLE, BASS.
9
Talkover on/off
On/off switch for the talkover function. With the button
pressed (blue LED lights), the levels of the channels 1-3
are automatically attenuated by 15 dB when
announcements are made with the DJ microphone.
10
Microphone channel
on/off
On/off switch for the DJ microphone channel. With the
button pressed (red LED lights), the DJ microphone is
switched on.
11
Tone controls
3-band equalizer for the DJ microphone: TREBLE,
MIDDLE, BASS.
12
Level control
Level control for the DJ microphone.
13
Control SESSION IN
Level control for a mixer connected to the jacks
SESSION. Please note that the signal is directly routed to
the mix and not to the crossfader.
