00072954.DOC, Version 1.0
17/20
5. SET UP
5.1 Installation
Set up the mixer on a plane surface. Please make sure that there is enough space around the unit for
ventilation to improve heat dissipation. Steady overheating will damage the unit.
5.2 Connections
Switch off the mixer prior to connecting any units or to changing any existing connections.
1
Connect units with line level output (e.g. CD players) or turntables with magnetic system to the
corresponding RCA jacks of channels 1 and 2 (white jack = left channel; red jack = right channel). If
your turntable is equipped with a separate ground lead, connect it to the clamping screw.
• For units with line level output, leave the respective input selector switch disengaged.
• For turntables, engage the input selector switch (red LED lights).
2
Connect a dynamic DJ microphone with an unbalanced 6.3 mm plug to the microphone input MIC.
3
Connect the amplifier to the unbalanced RCA master output.
4
For sound recordings, connect the recording unit to the output REC OUT. The recording level is
independent of the position of the master control.
5
The input channels can be monitored via stereo headphones. Connect the headphones to the 6.3 mm
jack HEAPHONES.
6
Connect the cable of the power unit to the power input and the power unit to a power outlet.
• Use the mixer only with the supplied power unit. Always disconnect the mains connector when you wish
to change connections, move the unit to a different place or if it is not used for a longer period.